TIMBER WINCH WITH CHAIN : TIRMAX

4 or 6 tons timber winch with chain : a rabaud exclusivity. Adaptation front / rear on the carrier

  • Pulling force 4 tons (TIRMAX 4) or 6 tons (TIRMAX 6).
  • Pulling system with chain – A RABAUD exclusivity.
  • Advantages of a chain:
    • No problems with extreme conditions (you can drive on it, put the machine on it…)
    • No effort to pull it out
    • Possibility to wind the chain around a tree to pull from aside
    • No maintenance : no daily lubrication
    • Speed and power are always constant
    • Famous system, already used on RABAUD log splitters.
  • Winding and unwinding of the chain with hydraulic motor.
  • Mechanical brake to hold the chain even in case of breakdown.
  • Adaptation on front is possible.
  • Blade for a good penetration into the ground.
  • Compact machine.
  • 2 support stands for a better stability.

TIRMAX 6

TIRMAX 6
TECHNICAL CHARACTERISTICS
MODEL:
Pulling force
Cable length
Average winding speed
Control
Dimensions (L x W x H)
Weight
Tractor power
Linkage
Equipment
<TIRMAX 4>
4 Tons (constant)
Chain 50 m (6 x 18 mm)
0,5 m/s (constant)
Tractor pump
0,66 x 1,50 x 1,46 m
280 Kg
from 20 to 60 HP(Pressure 180 bar / flow 35L/min)
3 point n°1 and n°2
Tools chest
<TIRMAX 6>
6 Tons (constant)
Chain 70 m (6 x 18 mm)
0,5 m/s (constant)
Tractor pumpor or PTO 540rpm flow 75L/min
0,71 x 1,52 x 1,56 m
500 Kg
from 50 to 150 HP (Pressure 200 bar / flow 75 l/min)
3 point n°2 and n°3
Tools chest